Ide Cable Select Position. In this arrangement the drive was not jumpered as. cable select, also referred to by the acronym cs, is a disk drive jumper setting which automatically sets the priority of a. all ide drives have jumpers that select the master or slave role on the controller, but modern drives also have a. you simply set the jumper to cable select on both drives and depending on where you connected them to the cable the computer. the drive position on the cable matters if you are doing cs cable select. The use of cable select. in later years, another option was available: With cs, the position on the cable tells the mb. thus, all you need to do is align the pin 1 marking on the connector to the pin 1 marking on the controller. The adapter can connect sata and ide hard drives through usb. i bought an usb / sata / ide combined adapter.
from www.ceeri.res.in
the drive position on the cable matters if you are doing cs cable select. The adapter can connect sata and ide hard drives through usb. The use of cable select. In this arrangement the drive was not jumpered as. all ide drives have jumpers that select the master or slave role on the controller, but modern drives also have a. thus, all you need to do is align the pin 1 marking on the connector to the pin 1 marking on the controller. i bought an usb / sata / ide combined adapter. cable select, also referred to by the acronym cs, is a disk drive jumper setting which automatically sets the priority of a. With cs, the position on the cable tells the mb. you simply set the jumper to cable select on both drives and depending on where you connected them to the cable the computer.
lana cucina pagaia cable select hdd Sulla testa di cura Voglio
Ide Cable Select Position With cs, the position on the cable tells the mb. i bought an usb / sata / ide combined adapter. you simply set the jumper to cable select on both drives and depending on where you connected them to the cable the computer. in later years, another option was available: cable select, also referred to by the acronym cs, is a disk drive jumper setting which automatically sets the priority of a. the drive position on the cable matters if you are doing cs cable select. The adapter can connect sata and ide hard drives through usb. thus, all you need to do is align the pin 1 marking on the connector to the pin 1 marking on the controller. With cs, the position on the cable tells the mb. The use of cable select. In this arrangement the drive was not jumpered as. all ide drives have jumpers that select the master or slave role on the controller, but modern drives also have a.
